Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
18.07.2013 Working
Instructions
WIDOS ESI 4000
Page 16 of 37
5.1.2. How to work with an extension cable
Only use extension cables that are admitted and marked with the following conductor cross-
sections:
Up to 20 m: 1,5 mm² ; Type H07RN-F
Beyond 20 m: 2,5 mm² ; Type H07RN-F
The extension cable may only be used in an unfolded and straight condition!
5.2. Accessories for data read in / out
5.2.3. Authorization card
Each supplied machine normally includes a
general authorization card
. It authorizes to carry
out all functions (including special functions).
Moreover, a
user authorization card
is included. It entitles to carry out all functions except
modifications of date, time and authorization.
Optionally, an
initialization card
can be purchased by which the welding is started
independently from the device (e.g. in the trench).
Keep card dry and clean.
Do not fold card or expose to strong magnetic fields.
The card is not transferable.
5.2.4. Bar code reading pen
In order to read in the bar codes, equally draw the reading pen over the bar code (hold pen
vertically), the scanning is acoustically confirmed.
The reading pen is ready when the red lamp at the pen top illuminates.
Always store the pen in the bag after its use.
5.2.5. SD – card and reading device
The ESI 4000 is equipped with a drive for a SD card.
The drive memorizes the welding data in the internal memory as well as on the SD card as
soon as a card is in the drive.
Data of appr. 32000 weldings can be stored on a card with a memory of 64 MB.
The SD card has to be formatted by „FAT 16“ before use.
Insert the card with the marking to the top and
cautiously
into the reading device with
minor efforts.
The card can be read out with a WICON program.
Do not fold, open, overheat and wet the card!
Please only use SD cards purchased from WIDOS. We will not be liable for any
cards from other manufactures!
