9
10.
If any of the following conditions occur, isolate the electricity
and water supplies and refer to
“To contact us”
, on the
back page of this guide.
-
If the cover is not correctly fitted and water has entered
the unit case.
-
If the case is damaged.
-
If the unit begins to make an odd noise, smell or smoke.
-
If the unit shows signs of a distinct change in
performance, indicating a need for maintenance.
-
If the unit is frozen.
11.
Isolate the electrical and water supply before removing the
cover.
12.
Mains connections are exposed when the cover is removed.
13.
Refer to the wiring diagram before making any electrical
connections.
14.
Ensure all electrical connections are tight, to prevent
overheating.
Caution!
1.
Read all of these instructions and retain this guide for
later use.
2.
Pass on this guide in the event of change of ownership of the
installation site.
3.
Follow all warnings, cautions and instructions contained in
this guide, and on or inside the appliance.
4.
The electrical installation must comply with the “Requirements
for Electrical Installations” commonly referred to as the IEE
Wiring Regulations, or any particular regulations and practices,
specified by the local electricity supply company in force at the
time of installation. The installation should be carried out by an
electrician or contractor who is registered, or is a member of, an
association such as:
