11
6.
Do not
use compounds on the shower unit joints, they may
cause damage to the mechanism inside.
7.
Do not
insert fingers into the Push Fit connections.
8.
The supply pipe ends
must be free from burrs
, which, ifnot
removed will damage the Push fit seals.
9.
If plated tubing is used for inlet pipework remove 25mm of
plating to ensure good seal. Stainless steel piping
MUST
not be
used.
10.
15mm polythene plastic pipe suitable for hot water may be used
to supply the shower unit, but internal pipe supports
must be
used.
11.
Supplies
must be
thoroughly flushed to remove any debris
before connecting the shower unit.
12.
Fit servicing valves in an accessible position.
