12
Thermostatic Power Shower
Warning!
Do not fix the shower
unit to the wall until plumbing
and electrical installations have
been completed.
1.
Pull off inner temperature
control, temperature
indicator and outer flow
control to reveal cover
securing screw.
2.
Unscrew cover securing
screw and lift cover from
bottom to remove.
3.
Hot and cold inlet supply
connections as marked
are:-
Hot – Left
Cold – Right
Note!
Reversed supply
connections
cannot
be
catered for with this
appliance
Run the hot and cold water
supply pipes at 28mm
centres, ensuring that the
pipe ends project into the
appliance by 30mm to allow
connection into the inlet
manifold.
28 mm
30 mm
