FUEL BED LAYOUT
1. Fill burner with vermiculite as
shown. Ensure that the vermicu-
lite is level and flat and is filled
fully up to the rim of the burner.
Do not press, pat or otherwise
compact the vermiculite beyond
it's own weight.
2. Place the ceramic log support
centrally on top of the vermiculite
bed as shown. The four flat faces of
the log support should be facing
downwards. Do not press the log
support downwards, as this will
compact the vermiculite.
3. The ceramic log set comprises of
Eight large logs, and six smaller
ones. Initially, put the six smallest
logs to one side. Next, take two of
the larger logs and position as
shown, towards the back of the
burner with one end of each log
resting on the log support. The
other ends of the logs may rest on
or near to the metal rim of the
burner. The logs should be pointing
towards the centre of the log sup-
port.
IMPORTANT : Do not obstruct
view of the pilot unit.
3
5.0
