12
13.4. There are two screws hidden in the tubular
frame at the front end of the console and the
rear of the console. See Figure 13.4.
13.5. The two other screws are located under the con-
sole mounting bracket. See Figure 13.5.
NOTE:
If the console mounting bracket is slot-
ted, where it is attached to the seat frame box, it
may be easier to loosen the mounting screws
from the seat frame and leave bracket mounted
to the console.
13.6. Using a 1/2” socket and box end wrench,
remove the four hex screws connecting the lap-
bar levers to the pivot bracket. See Figure 13.6.
13.7. Remove the lapbars and set them aside.
NOTE:
Before loosening the hex screws, mark
their position to facilitate reassembly.
13.8. Carefully remove console from unit.
NOTE:
Unscrew fuel cap when removing the left
side console.
13.9. If any electrical connections are present discon-
nect or remove switch from console. See Figure
13.9.
Figure 13.4
Figure 13.5
Console Mounting Screws
Figure 13.6
Hex Screws
Figure 13.9
www.mymowerparts.com
For Discount White Outdoor Parts Call 606-678-9623 or 606-561-4983
