33740-9-1015
Page 59
33740-9-1015
Page 58
MAINTENANCE AND SERVICE
Figure 83
Figure 84
Figure 85
Wiring
If any of the original wire supplied with this unit must be replaced, it
must be replace with 18 GA. 150°C wire or its equivalent.
MAINTENANCE AND SERVICE
Figure 86
Figure 87
Accessing Gas Valve and Controls
1. Remove the Offset Frame and Glass Frame.
2. Remove the Burner Components Heat Shield.
See Figure 86
.
3. Remove logs from firebox.
4. Remove the liner bracket on top of the right-hand liner panel
and remove right hand liner panel.
5. Remove the Access Plate.
See Figure 86.
NOTE
: The control Module is located in the front right hand corner
of the cavity. To remove it, lift up and away from the wall.
NOTE
: If it is necessary to remove one of the gas valve train
components, break free the plumbing fittings and remove
the screw indicated in
Figure 87
.
COMPONENTS
HEAT
BURNER
SHIELD
ACCESS
PLATE
