33740-9-1015
Page 31
33740-9-1015
Page 30
FIBER pANELS
pLACING THE REQUIRED FIBER pANELS AND FLOOR LINER INTO FIREpLACE:
1.
Locate the Center Floor Liner, and place on the fireplace floor in front of the front burner.
2.
Locate the Left and Right Side Floor Liner and place on the bottom left and bottom right of fireplace floor.
3. Shift the three Floor Liner sections as far forward as possible.
4. Locate Rear Panel and place tight against rear wall into rear bottom bracket.
5.
Locate Left Panel and place into position against left-side firebox wall. Secure using front upper bracket and screw provided.
6.
Place Right Panel into position against right-side firebox. Secure with front upper bracket and screw provided.
Figure 50
NOTE: Install liner before positioning the logs in place.
1. Apply a single layer of small “dime-sized” pieces of rock wool (glowing embers) in the shaded areas shown below.
NOTE:
Pieces of glowing embers should be fluffed up prior to placement onto the burner.
NOTE:
Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application
of excess loose material (glowing embers) may adversely affect performance of the appliance.
WARNING
All previously applied loose material must be removed prior to reapplication.
TOp View - Ember placement Shown in Shaded Area
Figure 51
GLOWING EMBERS
