White Mountain Hearth DVP42FP Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 72

background image

21759-6-0608

Page 59

FIRST USE OF TRANSMITTER

Status

Action

Begin communication between transmitter and receiver/valve.

Move LOCAL/REMOTE Switch to LOCAL position for at least two
seconds; then move switch to the REMOTE position.

Transmit unique code.

Press Fan or Flame key within 30 seconds.

Conﬁrm recognition between transmitter and receiver/valve.

Observe LED turns on for one second.

Chose Remote or Local operation.

Move LOCAL/REMOTE switch to LOCAL or leave in REMOTE.

Operation in the Remote Position

AUTO Mode

With the control in the AUTO mode, the ﬂame in the main burner will turn on, off, or change height based on the heat needed to maintain the set temperature.

Status

Action

Set to AUTO.

Press MODE button until mode is AUTO.

Change set temperature.

Press UP or DOWN key to change set temperature.

Flame.

Automatically changes.

Fan.

Automatically changes.

To Set Delay Timer.

Press TIME key followed by either an UP or DOWN arrow key.

CAUTION
Properly Damage Hazard.
Excessive heat can cause property damage.

In AUTO mode, the main burner will cycle indeﬁnitely to maintain the set temperature. Keep the transmitter in a heated living space to make sure that the main
burner is not on continuously.

On Mode

When the control is in the ON mode, the ﬂame and fan levels and the delay timer are changed with the UP and DOWN arrow keys.

Status

Action

Set to ON.

Press MODE button until mode is ON.

Flame.

Press FLAME button and press UP or DOWN arrow key to change ﬂame
height.

Fan.

Press FAN button and press UP or DOWN arrow key to change fan speed.

Delay Time.

Press DELAY TIMER button and press UP or DOWN key to change timer.

OFF Mode

The ﬂame in the main burner will turn off and the room temperature
will be displayed in the remote window.

Press MODE until mode is OFF.

Operation in the LOCAL Mode.

NOTE: Remote/Local switch on the receiver/valve must be in the LOCAL position.
FAN
Flame height and fan speed both go to the highest position.

In LOCAL mode, to turn ﬂame on/off, rotate manual knob from ON to
PILOT position.

Other Functions:

Change between Fahrenheit and Celsius temperature units.

Press UP and DOWN arrow keys at the same time and hold for at least
three seconds.

Fan Override during AUTO Mode.

Press FAN button, and press UP or DOWN arrow key to change the fan
speed.

Disable thermostat function in the AUTO Mode

Press the TIME, DOWN and FLAME arrow keys at the same time and hold
for at least three seconds.

RF TRANSMITTER FUNCTIONS

«
...
57
58
59
60
61
...
»

Содержание DVP42FP









































































Отзывы:

Нет отзывов

Похожие инструкции для DVP42FP

Бренд: Panadero Страницы: 30

Бренд: Pacific energy Страницы: 28

Бренд: RAIS Страницы: 40

Бренд: Napoleon Страницы: 28

Бренд: Laminvale Страницы: 9

Torch GSST8N and

Бренд: Napoleon Страницы: 16

Бренд: Faber Страницы: 40

Бренд: PFS Страницы: 24

Бренд: pleasant hearth Страницы: 87

Бренд: Dru Страницы: 24

EF11-36 LIMOUSIN

Бренд: Focal Point Страницы: 13

Malmo Contemporary Tall Steel Chimenea...

Бренд: La Hacienda Страницы: 4

opti-myst avantgarde I

Бренд: EWT Страницы: 33

Бренд: Vogelzang International Страницы: 40

FACTORY-BUILT FIREPLACE

Бренд: SUPREME Страницы: 15

Бренд: SUPREME Страницы: 25

Бренд: Lifepro Страницы: 15

Бренд: Heat&Glo Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды