Whisper Tech WhisperGen 3000 Series Скачать руководство пользователя

Страница: 2 / 53

WHISPERGEN PPS16 Personal Power Station

Installation and Commissioning Manual

Revision 080801

This publication or part thereof, may not be reproduced in any form by any method, for any purpose. For

conditions of use and permission to use this document for any form of publication, contact Whisper Tech Ltd.

Whisper Tech Ltd produces documentation in English only.

This document applies to WhisperGen PPS16 units with manufacturing numbers which end in a 6 or a 7.

Whisper Tech Ltd. makes no warranty, either expressed or implied, including but not limited to any implied

warranties of merchantability or fitness for a particular purpose, regarding Whisper Tech products and makes

such Whisper Tech products available solely on an “as-is” basis.

Warranties expressed or implied in this publication refer to warranties provided by authorised WhisperGen

agents. Warranty for proprietary parts shall be limited to those warranties extended by the supplier of those

parts.

In no event shall Whisper Tech Ltd. be liable to anyone for special, collateral, incidental, or consequential

damages in connection with or arising out of purchase or use of Whisper Tech products. The sole and

exclusive liability of Whisper Tech Ltd., regardless of the form of action, shall not exceed the purchase price

of the Whisper Tech products described herein.

Whisper Tech Ltd. reserves the right to revise and improve its products as it sees fit. This publication

describes the state of this product at the time of its publication and may not reflect the product at all times in

the past and the future.

Patents granted and pending worldwide.

Whisper Tech Limited, WhisperGen,

Personal Power Station, and WhisperGen Personal Power Station

are trademarks of Whisper Tech Limited.

Printed in New Zealand.

Содержание WhisperGen 3000 Series






















































Результаты поиска

Содержание WhisperGen 3000 Series

Отзывы:

Похожие инструкции для WhisperGen 3000 Series

Бренды по названию

Популярные бренды

Whisper Tech WhisperGen 3000 Series, Руководство по установке и пусконаладке

Результаты поиска

Содержание WhisperGen 3000 Series

Отзывы:

Похожие инструкции для WhisperGen 3000 Series

Бренды по названию

Популярные бренды