WhisperGen PPS16 Installation and Commissioning Manual Rev: 080801
1
1.
Transporting the WhisperGen
The WhisperGen shall be transported:
∙
upright;
∙
bolted to a pallet and protected with a wooden cover labeled “Fragile”, and “No stack”;
∙
separated from lead acid batteries;
∙
with the exhaust heat exchanger unbolted from the burner, and clamped to the enclosure
base;
∙
depressurised – see page 4
for details.
2.
Unpacking the WhisperGen
Removal of the pallet base is optional. See this page, Mounting the WhisperGen.
To unpack the WhisperGen:
1.
Unscrew the screws around the bottom of the crate.
2.
Carefully lift the cover vertically from the WhisperGen.
3.
Unpack the spare parts and installation pack from beside the WhisperGen.
3.
Mounting the WhisperGen
See
Figure 1
: Minimum Clearances, Services, and Mounting bolts layout, pages 2 and 3.
The WhisperGen shall be mounted in a location which:
●
is clean and dry;
●
is not airtight; and
●
includes an opening to fresh, clean and dry air, which is the equivalent of at least
2000mm
².