manualshive.com logo in svg

Whirlpool WWD22A, Руководство по обслуживанию

Поделиться
Скачать
Whirlpool WWD22A Скачать руководство пользователя страница 20

MSEX0060i

20

DISMOUNTING

- 

Release the Clamp and remove the outlet Hose attached to the
Electric Pump;

- 

Release the 3 screws that fasten the Electric Pump to the Tub;

- 

Pull it outwards.

5.9 – Motor

The Motor enables reverting rotation direction during the Agitation cycle, which is controlled by the
Electronic Control (PCB). In the spinning cycle it rotates in the clockwise direction only.

The  WWD22A is fitted with a 1/4 HP motor.

TEST

1.  Disconnect Wiring Harness;

2.  Check continuity between terminals, as follows;

Continuity (Ohms - 

Ω

)

TERMINALS

Motor 220V - 60Hz   ¼ HP

White and Red

15,05 to 16,97

White and Yellow

15,05 to 16,97

Before changing Motor check:

-

 

Continuity on Wiring Harness;

-

 

Capacitor;

-

 

If shaft rotates freely when released form Belt;

-

 

If the Mechanism is not locked.

DISMOUNTING

-

 

From the lower side of the Motor Support, release the nuts that
fasten the Motor with the Support

-

 

Then release the belt, loosening the Motor.

Содержание WWD22A







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды