PAGE 8
FOR SERVICE TECHNICIAN’S USE ONLY
DO NOT REMOVE OR DESTROY
QUICK OVERVIEW TEST MODE —
See page 4 to access Quick Overview Test Mode. = ON
Press the
START
button to begin the Quick Overview Test.
IMPORTANT:
Lid must be closed and locked to perform
Quick Overview Test.
FUNCTION
Recommended Procedure
(Status LED names may vary between makes and models)
SOAK
/
WASH
RINS
E
FINA
L
SPI
N
DONE
LI
D
LOCKED
LID WILL LOCK
On
COLD VALVE WILL ACTUATE
On
HOT VALVE WILL ACTUATE
On
SHIFTER MOVES TO AGITATION POSITION
On
MOTOR AGITATES
On
DRAIN PUMP WILL ACTUATE
On
SHIFTER MOVES TO SPIN POSITION
On
MOTOR SPINS
On
LID REMAINS LOCKED UNTIL WASHER SENSES A STOPPED
BASKET
On
LID WILL UNLOCK AND CYCLE COMPLETES
STATUS LEDs
If motor does not agitate, go to Manual Overview Test: Gentle or Heavy Agitation, page 9.
If water is not draining, go to Manual Overview Test: Drain, page 9.
Motor must be at “0” RPM. If lid does not lock, go to Manual Overview Test: Lid Lock, page 9.
If water is not present, or temperature is wrong, go to Manual Overview Test: Cold Valve, page 9.
If lid does not unlock, go to Manual Overview Test: Lid Lock, page 9.
If water is not present, or temperature is wrong, go to Manual Overview Test: Hot Valve, page 9.
Basket must stop spinning (0 RPM) before test continues to next phase. Time for basket to stop spinning may vary
from 30 seconds up to 2 minutes.
If basket is not turning, go to Manual Overview Test: Low or High Spin, page 9.
Est. TIME
In Seconds
1
60
10
~5-15
10
Till Empty
~5-15
10
~30-45
1
~3 min
1
2
2
1
4
4
1
4
2
4
2
1
8
8
1
8
2
