I N P U T P A N E L
page 6
D-8 / Feb 2009
GROUP Assign Displays
These four LED indicators (GROUP) show which audio group(s) the
channel has been assigned to using control switches in the GROUP ASSIGN
section of the MST-D8 panel (page 4-3). To assign an input fader to a GROUP,
first press the INPUT fader’s SET switch, then press the appropriate Group
assign switch at the top of the MASTER fader panel.
MXM Displays
Each fader can be assigned to any combination of the eight Mix-Minus
buses. The assigned settings are displayed in the MXM 1-8 LED displays.
Faders are assigned to these MXMs by using the
touch screen GUI on the VGA monitor (see
Chapter 6 for details) or using the hardware
switches located on the MON-D8 panel. On the
GUI press the MIX MINUS button at the top of
the VGA monitor. Use the MXM Matrix to select
the desired input fader and then press the desired
MIX-MINUS ASSIGN button, located on the
MON-D8 panel. When you light one of these
LED’s you are removing the fader from the
Mix-Minus bus.
PFL(CUE) Switch
The CUE switch lets the control surface operator monitor the channel’s
pre-fader signal.
MON-D8 Panel
