manualshive.com logo in svg

Wheatstone Corporation D-8, Техническое руководство, Страница: 40 / 45

Поделиться
Скачать
Wheatstone Corporation D-8 Скачать руководство пользователя страница 40

page  39

D-8 / Feb 2009

A P P E N D I C E S

There are several other pre-defined logic Functions that can be used in a similar

manner with Wheatstone surfaces. The following table shows the Function name,
direction, and purpose for each of these Functions.

Function   Direction   Purpose

  Name

MachStart         Out          start a remote machine

MachStop         Out          stop a remote machine

OnTally             Out          light a remote channel ON indicator

OffTally             Out          light a remote channel OFF indicator

RemOn               In           turn a fader channel ON from a remote switch

RemOff               In           turn a fader channel OFF from a remote switch

RdyLED              In           control the OFF LED on a fader (typically by flashing)

                                          from a CUE output of a remote machine

Cough                 In           mute the audio from a remote location (typically the

                                          audio signal here is from a microphone) by pressing a

                                          remotely located switch

Talkback             In           puts the fader channel in CUE on the surface - typically

                                         used to allow talent at a remote mic location to talk to a

                                         control room operator

Содержание D-8














































Отзывы:

Нет отзывов