manualshive.com logo in svg

Wheatstone Corporation D-8, Техническое руководство, Страница: 19 / 45

Поделиться
Скачать
Wheatstone Corporation D-8 Скачать руководство пользователя страница 19

M A S T E R   P A N E L

page  18

D-8 / Feb 2009

Master and Group SET buttons are located in the upper portion of the panel.
Groups may be assigned to Mix-Minus buses too.

Pressing a MASTER or GROUP SET button will cause the D-8’s VGA

screen to switch to the MAIN screen and display the output meters.

Master Program Outputs

Input Fader Assign to Masters

Input faders are routed to either master audio

output by using the MASTER ASSIGN switches
located directly on the input fader strips. You may
freely assign any input fader to either the 5.1/ST 1 or
ST 2 master audio outputs, or even to both.

Channel Master ON/OFF

The ON switch turns the channel signal ON;

pressing it again turns the channel signal OFF. The
switch LED lights to indicate the channel is ON.

Master Faders

These motorized controls set the levels of the

master channels.

NOTE that 5.1 MASTER fader’s knob engraved

with “5.1.”

Mute Groups

Mute Group Assign

Each input fader, Group, and Master can be as-

signed in any combination to MUTE ASSIGN A, B,
C or D. Assignment is made by first pressing the
channel’s SET button, then pressing the desired
INPUT CHANNEL MUTE ASSIGN button located
at the top of the MASTERS panel. Indicators on the
input panels show the mute assignments.

Mute Master

The MUTE MASTERS A, B, C and D buttons

provide a rapid way to mute a group of signals. When
MUTE MASTERS A is engaged (the button is lit) all
channels that have been assigned to MUTE MAS-
TERS A, as indicated by the MUTES display on each
input channel, will mute. MUTE MASTERS B, C,
and D work in a similar manner.

Содержание D-8














































Отзывы:

Нет отзывов