49
48
Before you start
1. Hold the JACKPORT Dock (8) upwards.
Is an adapter plug (7) plugged into the blade terminal adaptor FSA (11):
2. Remove the blade terminal adaptor FSA (11) against the direction of arrow
(see picture on page 39).
3. Push the shield sidewise in direction of arrow (picture page 38) until you are able
to remove the shield from your JACKPORT.
4. Pull the adaptor plug (7) upwards out of the JACKPORT.
5. Connect the plug connection of the power cord NKC-C7 (12) from above
with the JACKPORT.
6. Keep your shield (6) with your JACKPORT accessories while using the power cord.
Now, you can plug the power cord in any compatible power outlet.
Before you start
Use of the power cord NKD-C7 (12):
With the power cord:
· you can run the JACKPORT at difficult to access power outlets
· you can position the JACKPORT close to the audience
· you can optimize the position of the JACKPORT related to the audience
Important warnings related to the use with power cord.
)
Please note the security warnings on page 40 and 41.
)
Make sure that the JACKPORT is in a stable position especially in rooms
like washroom or kitchen special precaution is necessary.
· Make sure that there is no weight on top of the JACKPORT.
It could push buttons at the bottom of the JACKPORT.
· Put your JACKPORT in an upright position.
Содержание JACKPORT
Страница 1: ...GEBRAUCHSANWEISUNG MANUAL ...