43
42
Before you start
6. Choose the correct country specific adaptor plug (7) for the country in which you are.
7. Place the adaptor plug (7) from above into the JACKPORT.
8. Push the shield sidewise against the direction of arrow back into the JACKPORT until it snaps.
Further steps:
· How to use a blade terminal for example an Euro plug adaptor ASC (7) in a
protective ground contact outlet: Connect the blade terminal with the blade terminal
adaptor (11) (see page 44).
· How to use a wall outlet: Control the JACKPORT's straight position with the spacer (10)
(see page 46).
If these steps are not useful to you, please continue under
“Attach and disconnect appliances” (page 50):
Before you start
Exchange the country specific plug adaptors:
By exchanging the plug adaptors (see “Accessories” on page 65) you can use your JACKPORT
in many countries.
)
Please note the security warnings on page 40 and 41.
Is an attachment in the Dock (8), plugs AUX (5) or Charge (4):
1. Remove the attachment.
2. Hold the JACKPORT Dock (8) up.
Is an adapter plug (7) plugged into the blade terminal adaptor FSA (11):
3. Remove the blade terminal adaptor FSA (11) against the direction of arrow
(see picture on page 39).
4. Push the shield sidewise in direction of arrow (picture page 38) until you are able
to remove the shield from your JACKPORT.
5. Pull the adaptor plug (7) upwards out of the JACKPORT.
Содержание JACKPORT
Страница 1: ...GEBRAUCHSANWEISUNG MANUAL ...