Installation instructions
Status: 19.02.2024
Fiat Ducato Serie 7 /Serie 8
Cab system
Jehnert Sound Design I Im Michelreis 14 I 72124 Pliezhausen I Tel.: 07127-93457-0 I [email protected] I www.jehnert.de
Art. No. 65580
Packing list:
2x 26mm neodymium softdome tweeter „XE26“.
2x 80 mm midrange driver „XE80
2x 165 mm JEHNERT Power Woofer „XM165“ mounted to adapter ring
1x mounting set MHT module: 10x Spax 3,5, x 3,5
2x MHT crossovers wrapped in damping fl eece
Benötigtes Werkzeug / Zubehör
• Phillips screwdriver
• Torx screwdriver TX25
• 10mm open-end wrench
• Gloves
• Plastic wedge
• Padding material for surface protection
• Tray, or similar for storing small parts
• Side cutter
• cordless screwdriver with 4mm drill bit and
Phillips bit
• Insulating tape
3-way cab system Fiat Ducato Series 7 and Series 8 (65580)
Model/year: Fiat Ducato Series 7 (Type 250 ) 2006-2021
Series 8 from YOM 2021
Recommendation:
In order to achieve the full sound performance of the sound system, we recommend the expansion set, which, with its
additional amplifi er and subwoofer signifi cantly increases the sound performance of the system.
Fiat Ducato Series 8:
for an optimal sound experience, the complete insulation of the door lining is recommended.
(required insulation material is not included in the scope of delivery, can be reordered, Art.No.: 27970)
Radio settings:
To achieve the best sound, all settings on the radio (bass, treble, loudness, equalizing, etc.) should be set
to ZERO or OFF.
