Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No. 14400
Page # 4
Assembly Instructions
Note: Make sure all the clips lock in place securely before using the unit. If you have
any defective parts please do not use, improper installation may result in damage or
injury.
1. Unpack the unit and lay parts out on floor.
2. Connect Cross Beam (part B) to the Column of Upright Frame (part A) by inserting
the two clips on the bracket of Cross Beam into the bottom two keyholes of the
column. Tap down beam with rubber mallet to seat the beam into the column. See
detail #1.
3. Attach beam to second Upright Frame (part A) as shown in detail #1. Make sure
the clips are at the same location on the frames and beam is level. Two people
may be required to install these beams.
4. Repeat previous steps to attach the other Cross Beam (part B) to the opposite two
Columns. Make sure the two Cross Beams are at the same level.
