5
10. INTERCHANGEABLE ROTOR
11. CHANGING THE ROTOR
4. If the tubes are not loaded symmetrically then the
imbalancedetector will cut off the running centrifuge
for device & user safety.
5. The following are the incorrect methods of loading
tubes in the centrifuge the rotor.
Insert the hexagonal allen key into the marked hole
provided on the side of the rotor. The grub screw is
located at the bottom of the rotor on the marked side.
To remove the rotor, turn counter - clockwise to loosen
the screw and then gently pull the rotor up vertically.
Insert the new rotor from the top onto the motor shaft
and tighten the
9. ROTOR BALANCING (CONT)
1.5 ML / 2.0 ML
1.5 ML / 2.0 ML
PCR STRIP
0.2 ML
0.4 ML
0.5 ML
1.5 ML / 2.0 ML
1.5 ML / 2.0 ML
1
2
3
4
5
6
7
8
8 Different types of test tubes can be centrifuged
by using two interchangeable rotors
8 x 0.2,0.4,0.5,1.5,2 ml
ROTOR_8 SLOT
16 x 0.2 ml
PCR ROTOR
WESTLAB
SMART MICRO
CENTRIFUGE
USER MANUAL
CODE 663-958
C
