6
12. OPENING CENTRIFUGE LID
screw again. Turn clockwise to tighten the screw which
is located under the bottom of the rotor. Please check
that the rotor is tight enough to avoid any accidents.
Note:
Tightening the screw will be in clockwise direction and
the loosening will be in counter-clockwise direction
Trying to open the centrifuge
lid by pulling the
“Lid Release” button up is
the wrong method of opening
the lid. Pulling the
“Lid Release” button up will
break the button or damage
the button.
11. CHANGING THE ROTOR (CONT)
Motor Shaft
To loosen
To tighten
Rotor
Grub Screw
Key
Sticker Mark
60
RPM(X100)
Min
Pulling up
Lid Release
Button
Wrong Method
Pulling up
Lid Release
Button
Wrong Method
60
RPM(X100)
Min
WESTLAB
SMART MICRO
CENTRIFUGE
USER MANUAL
CODE 663-958
C
