To open the centrifuge lid,
press the “Lid Release”
button down.
Push Down
Lid Release
Button
Correct Method
Push Down
Correct Method
Lid Release
Button
60
RPM(X100)
Min
7
13. OPERATION
TIME & SPEED SETTINGS AND DISPLAY
To operate this Micro Centrifuge, the below steps
should be followed:
1. Connect the power adaptor & Switch ‘On’ from the
rear side so that the display will show you the fix
RPM readings.
2. Load the rotor symmetrically to avoid accidents and
damage to the centrifuge.
4. Close the lid & flip ON the front switch to start
centrifugation.
5. Once the centrifugation is completed, turn the front
switch to “Off” to gradually stop the rotor.
6. After the rotor has stopped, press the lid release
button and open the lid with your thumb in front and
fingers on the top - simply lift the lid back on the hinge.
7. If you want to stop the centrifuge quickly, push the lid
release button and the rotor will stop within a
few seconds.
In the following pages the routine centrifuge operation
procedures are explained in brief.
WESTLAB
SMART MICRO
CENTRIFUGE
USER MANUAL
CODE 663-958
C
