manualshive.com logo in svg

Westlab 663-575, Руководство по эксплуатации продукта, Страница: 7 / 11

Поделиться
Скачать
Westlab 663-575 Скачать руководство пользователя страница 7

7

PRODUCT MANUAL

1800 358 101

[email protected]

www.westlab.com.au

+64 9 553 3677

[email protected]

www.westlab.co.nz

646 568 5391

[email protected]

www.westlab.com

1 877 822 1455

[email protected]

www.westlab.com

Australia

New Zealand

United States

Canada

4.2 Operation

User Interface & Display:

Item #

Description

Function

1

Temp

Press ‘Temp’ to select the temperature value. Then press ‘+/-’ 

to set the temperature value in °C.

2

Speed/

Pulse

Press ‘Speed’ to select the speed value. Then press ‘+/-’ to set 

the speed value in RPM. Long press ‘Speed/Pulse’ for pulse 

mode.

3

Time/ATS

Press ‘Time/ATS’ to select the time value. Then press ‘+/-’ to set 

the time value in minutes. Long press ‘Time/ATS’ for ATS mode.

4

Temp. 

Selection

Press ‘°C/F’ to change the unit in which temperature is 

displayed.

5

Increment

Press ‘+/-’ to increase values. 

6

Decrement

Press ‘+/-’ to decrease values.

7

Probe

To display the temperature of probe at Actual  

Temperature Display.

8

Start/Stop

Press ‘Start/Stop’ to Start or Stop any operation.

9

LED

The LED glows when the top plate of the stirrer is HOT  

and is greater than or equal to 50°C.

Содержание 663-575












Отзывы:

Нет отзывов