Westinghouse AC System, Руководство по установке

Страница: 33 / 54

Westinghouse Solar AC Installation Guide
Copyright © 2011 - Westinghouse Solar 29 | P a g e
Step 8 - Slide 3/8" Hardware into the lower Groove of the second row module. Slide the hardware
through the Groove into the open end of the North/ South Bracket. Secure this hardware with the
V2 Westinghouse Solar wrench once the outer edges of the two rows are flush. By tightening this
hardware in this step you will avoid the module sliding out of alignment when the next module is
spliced in the east/ west direction.
Tip: By pre-threading the 3/8" flange nut onto the 1" hex bolt it will take fewer wrench rotations
to complete the assembly in step 8.
Step 9 - Connect Modules in the east/ west direction only after securing the North/ South Bracket
hardware and installing the 3/8" hardware at the top of the array. After each additional modules
North/ South bracket and hardware are secure follow the East/ West assembly process described in
steps 1-4.
6. Grounding
Splices and North/South brackets provide contiguous grounding between panels and across rows.
Proper grounding is achieved by assembling the module frame(s) contiguously using two bonding