Westinghouse AC System, Руководство по установке

Страница: 26 / 54

Westinghouse Solar AC Installation Guide
Copyright © 2011 - Westinghouse Solar 22 | P a g e
Step 1D. Installing Hardware - Place the Composition mount flashing in its final location prior to
installing the lag bolt. Holding the lag bolt and fender washer, thread this hardware through the
oblong hole at the base of the serrated L-Bracket. With all of these components assembled, place
the tip of the lag bolt through the 5/16" hole in the raised area of the Composition mount flashing.
Before tightening, the lag bolt must be seated in the pre-drilled hole; this will ensure that the lag
bolt does not damage the underlying rafter, achieving maximum attachment strength.
Step 1E. Tightening Lag Bolts- Using socket wrench or impact driver with a 1/2" socket, slowly
torque down lag bolts until the head of the lag bolt is 1/8" from seating on the Fender washer.
This 1/8" of space will allow the installer to line up and adjust the L brackets before tightening
them down to their final position. Excess caulk should squeeze out of the hole and surround the
head of the lag bolt.