3. A
SSEMBLY
W
ESTFIELD
- G
RAIN
A
UGERS
3.6. T
RACK
S
HOE
AND
T
RACK
S
TOP
WR 60/80/100 X 26’ - 71’ EMD M
ODEL
20
30255 R3
3.6. Track Shoe and Track Stop
1. Slide roller track shoe onto track.
2. Attach the upper angle-iron track stop with
7/16” x 1" bolts, heavy flat washers, and
locknuts (Figure 3.4). For correct
positioning of the upper track stop, see
Table 3.1.
3. Attach the lower angle-iron track stop (on
36’, 56’, and 61’ augers) with two
7/16” x 1" bolts and locknuts. For correct
positioning of the lower track stop, see
Table 3.2.
Failure to locate track stops in the proper holes can result in damage
to auger and/or personal injury.
4. Slide track shoe along full length of track to make certain there is no binding and that
track ends are properly aligned. The upper and lower tracks mus3.2t be aligned to
allow track shoe to roll smoothly over this joint (Figure 3.3).
Figure 3.4
Table 3.1 Upper Track Stops
a
Auger
Length
From Discha
rge
End
Upper Track Stop Locations
1st Hole
2nd Hole
3rd Hole
4th Hole
5th Hole
26’
6”-8”
-
-
-
-
31’
6”-8”-10”
-
-
-
-
36’
-
6”-8”
-
-
-
41’
10"
-
-
6”-8”
-
46’
-
-
-
8”
-
51’
6"
10”
-
-
8”
56’
-
8”
-
-
-
61’
-
6”
8”-10”
-
-
71’
-
-
-
8”-10”
-
a. Count from upper discharge end of auger. For example, “1st Hole” refers to the first set of holes in the upper end
of the track nearest the discharge end.
Table 3.2 Lower Track Stops
a
a. Count from the lower intake end of auger. For example, “1st Hole”
refers to the first set of holes in the lower end of the track nearest the
intake end.
Auger
Length
From Int
a
ke End
Lower Track Stop Locations
Welded Track
Stop
1st Hole
2nd Hole
26’
6”-8”
-
-
31’
6”-8”-10”
-
-
36’
-
6”-8”
-
41’
6”-8”-10”
-
-
46’
8”
-
-
51’
6”-8”-10”
-
-
56’
-
-
8”
61’
6”
8”-10”
-
71’
8”-10”
-
-
