Westfalia 93 66 48, Оригинальное руководство пользователя

Страница: 46 / 54

42
Assembly | Operation
Operation
– Grinding the Cutters
1. Insert the battery into the battery recess. Do not force the battery
while inserting.
2. To remove the battery, first press the releasing button on the battery
and pull the battery straight up.
3. To switch on the machine, press the ON switch I (3a). Pull
down the handle (1). When sharpening, always wear protec-
tion goggles. Carry out the first trial grinding.
4. To switch off the machine, press the OFF switch 0 (3b).
Always wait for the grinding disc to come to a standstill before pro-
ceeding with the work! Never reach into the rotating grinding disc.
5. Inspect the saw chain for the most worn-out cutting tooth and start
sharpening this tooth. The most worn-out cutter is important in order
to sharpen all other cutters to the same depth. Mark the first sharp-
ened cutter in a suitable way (e. g. with chalk).
6. Loosen the fastening lever
(9), lift the chain stop (10)
and move the chain so that
the cutter after the next one can be sharpened.
7. Secure the chain with the fastening lever (9) and
sharpen this tooth. Make sure not to sharpen the
cutter too much in order not to damage the body of
the cutter!
8. Sharpen every second cutting tooth in one direction.
Then turn the angle of the chain holder assembly (8) to the needed
angle in opposite direction.
Operation
– Grinding the Cutters on the Opposite
Turn the chain holder assembly (8) only when the grinding disc is not
moving.
1. To sharpen the remaining cutters on the opposite,
first switch off the device and pull the battery.
2. Loosen the locking screw (6) and turn the chain
holder assembly (8) in the opposite direction up to
the corresponding angle. Re-tighten the locking
screw.