41
Assembly | Operation
Inspect the saw chain for the most worn-out cutting tooth and start
sharpening this tooth. The most worn-out cutter is important in order
to sharpen all other cutters to the same depth.
4. Turn the fastening lever (9) and the chain stop (10) forwards and pull
the first cutting tooth against the chain stop.
5. Fix this position of the chain stop (10) with the chain stop adjusting
screw (11a) and re-tighten the locking screw (11b).
6. Make sure the motor is
switched off. Pull down the
grinding disc (14) up to the
end in direction to the first
cutting tooth by using the
handle (1).
Make sure the adjusting
screw for depth stop (4a)
is touching the depth stop
platform (13).
7. For fine-adjustment of the saw chain position, use the chain stop
adjusting screw (11a). If the position is correct, fix this position with the
locking screw (11b).
8. Adjust the max. sharpening
depth with the adjusting
screw for depth stop (4a)
and fix this position with the
locking screw (4b).
Содержание 93 66 48
Страница 3: ...III Übersicht Overview 1 2 4a 4b 5 7 9 3a b 6 10 11a b 12 13 14 11a 11b 8 7 15 ...
Страница 50: ...46 Table Pitch Gauge Vice Angle Disc Width Depth Gauge ...
Страница 51: ...47 Tabelle Teilung Nutbreite Schärfwinkel Schleifscheibendicke Tiefenbegrenzer ...
Страница 52: ...48 Notizen Notes ...