40
Assembly | Operation
Before each use check all parts of the saw chain sharpener for proper and
correct function as well as for correct mounting. Especially inspect the
grinding disc, all mounting screws and protective devises for firm
mounting. Check whether all movable parts can turn freely.
1. Open the guide boards (12) by turning the
fastening lever counter clockwise.
The fastening lever is
spring-loaded. Pull out
and at the same time
rotate the lever coun-
ter
clockwise.
The
fastening lever can be
positioned in the de-
sired direction after re-
leasing the lever.
2. Lift the chain stop (10) backwards and insert
a chain to be sharpened between both guide
boards (12).
Make sure the saw chain can move freely
between the guide boards.
3. If you know the exact filing angle of the saw
chain, turn the angle indicator for vice angle
(7) to the desired angle. Loosen the locking
screw (6) and turn the scale according to the
desired angle. Afterwards, re-tighten the
locking screw.
If you do not know the exact filing angle of
your saw chain, position the angle indicator
(7) to 35° or adjust the angle according to
the chain types noted in the table on page
46. Position the grinding disc (14) as
shown in the drawing.
Common chains have a filing angle of 25°,
30° or 35°.
10
14
Содержание 93 66 48
Страница 3: ...III Übersicht Overview 1 2 4a 4b 5 7 9 3a b 6 10 11a b 12 13 14 11a 11b 8 7 15 ...
Страница 50: ...46 Table Pitch Gauge Vice Angle Disc Width Depth Gauge ...
Страница 51: ...47 Tabelle Teilung Nutbreite Schärfwinkel Schleifscheibendicke Tiefenbegrenzer ...
Страница 52: ...48 Notizen Notes ...
