Westfalia 93 66 48, Оригинальное руководство пользователя

Страница: 43 / 54

39
Assembly | Operation
Markings
Assembly
The saw chain sharpener is supplied partly assembled to ensure transport
protection. Please assemble the the machine as follows:
1. Place the motor assembly (1) on a solid, level
surface, e.g. a workbench. Ensure that the base
plate extends out far enough over the edge of
the workbench so that the saw chain can hang
down freely and you can easily access the
locking screw (6) at the bottom.
2. Tighten both components with the locking screw
(6). Turn the locking screw clockwise and hand-
tight only.
3. Position the base plate on the workbench up to
the markings that are beneath the plate.
4. For securely mounting the chain sharpener on
the workbench, use the mounting holes on the
base plate (6). Use suitable 6 mm bolts/screws
(not included in delivery).
5. The saw chain sharpener is assembled and ready for use. The already
mounted grinding disc (14) is for universal use. For replacing the
grinding disc read the chapter “Changing the Grinding Disc”.
Operation
– Adjusting the Grinding Angle
Before undertaking any adjustment on the device, make sure the device is
switched off and the battery is removed.