Westfalia 80 56 55, Оригинальное руководство пользователя

Страница: 21 / 32

15
Assembly and Using
3. The saw blade is only centred, but not bolted down – tighten the screw
only until the spring builds up good tension, but the blade can still be
moved. Make sure the centring piece is not offset.
Alignment of the Saw Blade
The saw blade must be aligned to the grinding stone. Depending on whether
the front or the back of the tooth is to be ground, the saw blade must be
aligned as shown in the pictures. The surface to be ground must be parallel to
the corresponding surface of the stone.
Position of the stone when
grinding the front of the
tooth Position of the stone when
grinding the back of the
tooth
Back of Tooth
Front of Tooth
Gap