![Westfalia 300 076 300 107 Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/westfalia/300-076-300-107/300-076-300-107_installation-instructions-manual_962792028.webp)
28
GB
4.
Attach the socket with the accompanying screws to the socket retaining plate, while ensuring
that the seals are sitting properly.
5.
In the vehicle's interior, put the part of the wire lane with the 22 pin plug in place on the left rear
light, placing the part of the wire lane with the cable colors red/green, gray/yellow and gray/
green on the right rear light.
Installing and Connecting the Control Unit
Depending on the type of vehicle, attach the control unit behind the left side covering or on the left of
the tail plate, using the supplied mushroom band. The control unit
may be installed irrespective of the position.
Attach the earth wires brown 1.5 and brown/white 2.5 to a suitable earthing position at the rear
area.
Place the continuous positive wires (red 1.5, red/yellow 1.5) on the left side of the vehicle up to the
battery, while ensuring that the wire cannot be damaged by vehicle parts. If necessary, provide the
wire with additional protection. Lock the end of the continuous positive wire into place on the sup-
plied fuse holder, locking the supplied continuous positive connection piece into place in the sec-
ond chamber of the fuse holder and secure the fuse holders locked contacts with the supplied fuse
clip. Connect the continuous positive connection piece's ring eyelet to the battery's positive pole.
Ensure that the fuse holder has been perfectly attached.
Connection to the Vehicle's Wires
When connecting the indicator wires the respective indicator wire must be separated at the rear
light and the wire ends must be connected with cutter connectors as outlined in the wiring plan.
Please ensure that installation is carried out by a qualified person and that the cutting connector
has a perfect contact with the respective wires.
Separate the wire to the rear fog lamp in the area of the rear lights or at a suitable
position; using cutting connectors to connect the wire from the rear fog lamp switch with the blue
lead and the wire to the rear fog lamp with the gray lead of the wire lane. For vehicles with two rear
fog lamps, the second rear fog lamp's wire is also to be separated and a connection between the
gray wire and the second rear fog lamp is to be made. (if necessary, extend the wire lane's gray
lead).
The vehicle's own rear fog lamp is switched off via the control unit.
Turn signal lamps
Disconnect line
Control unit
yellow or red/green
green/white or gray/yellow
indicator switch
separate
separate
gray
blue
connection to
the
second rear
fog lamp
disabling
contact
control unit
left rear fog lamp
right rear fog lamp
rear fog lamp switch
rear fog lamp switch