User Guide
4. Part Replacement
4.14 Chassis Replacement
4.14
Chassis Replacement
Table 49:
Procedure Info
Required Tools
Required Parts
# of People Required Time Required
•
Long T15 Torx
Screwdriver
•
# 2 Philips Screwdriver
•
T30 Torx Screwdriver
•
Tape Measure
•
Level
•
M5 x 12mm T15 Flat
Head Torx screws
•
Included Washers
•
Low-Profile M4 x 3.2mm
Philips screws (included
with rail assembly)
3
~2h
Step 1 :
Place the CMA into service position.
a.
Unlatch the CMA at the elbow connector by pressing the blue release button to unlatch
the connector from the rail.
Figure 318:
Unlatching a CMA Connector
b.
Swing the CMA away from the enclosure.
c.
The arm should be extended away from the enclosure as shown in the following example.
260
