User Guide
4. Part Replacement
4.2 IOM Replacement
Figure 41:
Removing IOM
Step 4 :
Remove the new IOM from its packaging.
Step 5 :
Install the IOM.
a.
Caution:
If a pin on the IOM’s internal connectors is bent or damaged, the
IOM will have to be replaced. For this reason it is imperative that the IOM is
not forced into position, that it is inserted straight, and that the directions for
installing the IOM are followed exactly.
b.
Ensure that the handles on the IOM are not latched. To unlatch them, press the latch
release in the direction shown in the following image.
68
