User Guide
4. Part Replacement
4.12 CMA Replacement
b.
Slide the nut plate down over the mounting pin on the back of the spacer bracket.
Figure 266:
Rack Spacer Nut Plate Installation
c.
Using a T15 Torx screwdriver, tighten the top captive screw to secure the mounting plate
in place. Then tighten the remaining captive screws at the bottom of the spacer bracket.
Torque all four of the captive screws to 3.38-3.61 Nm / 30-32 in-lbf.
Figure 267:
Captive Screws
d.
Repeat these steps to install the remaining rack spacer.
Step 13 :
Install the chassis into the rails.
223