Westermo GS-01, Руководство по установке

Страница: 44 / 56

44 6195-2201
+CMGW – Write Message to Memory
This command stores a message to memory storage (either SMS-SUBMIT or
SMS-DELIVERS). The memory location <index> is returned (no choice possible
as with phonCPBW).
The entering of text or PDU is done similarly as specified in command Send Message
+CMGS.
Command syntax in text mode: (<index> is returned in both cases)
AT+CMGW= <oa/da> [,<tooa/toda> [,<stat> ] ] <CR>
enter text <ctrl-Z / ESC>
Command syntax in PDU mode:
AT+CMGW= <length> [,<stat>] <CR>
give PDU <ctrl-Z / ESC>
Response syntax: +CMGW: <index>
or +CMS ERROR: <err> if writing fails
Parameter Definition:
<oa/da>: Originating or Destination Address Value in string format.
<tooa/toda>: Type of Originating / Destination Address.
<stat>: Integer type in PDU mode (default 2 for +CMGW), or string type in text mode
(default ”STO UNSENT” for +CMGW). It indicates the status of message in memory.
If <stat> is omitted , the stored message is considered like a message to be send.
Defined <stat> values:
PDU mode Text mode
0 ”REC UNREAD”
1 ”REC READ”
2 ”STO UNSENT”
3 ”STO SENT”
<length>: The length of the actual data unit in octets
Example:
Application to GSM AT+CMGW=”+33146290800”<CR> Write a message in
Hello, how are you?<ctrl-Z> text mode
GSM to application +CMGW: 4 Message stored in
OK index 4
Application to GSM AT+CMGW=<length><CR> Write a message in
<pdu><ctrl-Z> PDU mode
GSM to application +CMGW: <index> Message stored in
OK <index>