9
6601-2201
Electrical specification
RS-232/V.24
Data rate
115.2 kbit/s
Data format
8 data bits, none parity, 1 stop bit
Protocol
Transparent
Retiming
No
Circuit type
SELV
Transmission range
15 m
Isolation to
2000 Vrms to power interface
1500 Vrms to Ethernet interface
1500 Vrms to SHDSL interface
Galvanic connection to
RS-232
Connection
3-pin connector
Connector size
2.56 pitch
Shielded cable
Not required
Conductive housing
No
Miscellaneous
Only for diagnostic purpose for support crew
Number of ports
1
RS-232, Diagnostic port intended for support purpose *
Electrical specification
IEEE std 802.3. 2000 Edition
Data rate
10 Mbit/s, 100 Mbit/s, manual or auto
Duplex
Full or half, manual or auto
Circuit type
SELV
Transmission range
100 m
Isolation to
2000 Vrms to power interface
2000 Vrms to SHDSL interface
Galvanic connection to
None
Connection
RJ-45 shielded, auto MDI/MDI-X
Shielded cable
Not required, except when installed in Railway applications as
signalling and telecommunications apparatus and located close
to rails 2)
Conductive housing
Isolated to all other circuits
Miscellaneous
If Auto-Neg. is disabled then this interface will be set MDI,
see below.
Number of ports
1
Ethernet TX
* Diagnostic port is not implemented in the Beta version.
