Page
32
of
54
Maintenance and servicing
11
Maintenance and servicing
11.1
General information
All maintenance, repair and modifying work on the
WKB 660
must only be
carried out when it is stopped, the power supply disconnected or the engine
switched off. The procedure for stopping the machine must be strictly
adhered to as described in the operating instructions.
The
WKB 660
must be secured in a stable position and prevented from
rolling away.
The safety regulations in Chapter 4 apply.
Modifying or altering the machine is only permitted in agreement with the
manufacturer. The use of original spare parts and accessories authorised by
the manufacturer serves safety purposes. Using any other parts excludes
liability for the resulting consequences.
Observe before commencing work:
•
Visually check for damage and defects! Report any changes (including
changes in operating behaviour) immediately to the responsible service
personnel! If necessary, arrange for immediate decommissioning!
•
Check for completeness and functionality of all accessories. Worn or
functionally restricted parts must be replaced. Replacement parts must
be ordered from the manufacturer.
•
Check for completeness and legibility of all rating plates, information
signs and operating instructions. Replace missing or illegible signs and
documents.
