Page
23
of
54
Assembly, initial commissioning
7
Assembly, initial commissioning
7.1
Safety and security
In order to guarantee the safety of human and machine, the
simple and risk-minimising assembly/handling was considered
as early as during the design. The handling device is therefore
subject to all applicable DIN EN standards. Operator training and
instructions are required and further reduce the safety risk.
7.2
Assembly
The complete assembly and initial commissioning is carried out exclusively by
the manufacturer. The machines are subjected to an extensive test run and only
delivered after the successful approval.
7.3
Initial commissioning
Before initial commissioning, check the entire vehicle for
damage.
