030-300198 Rev. D
52
March 2003
WireSpeed Dual Connect NAT Router
User Guide
If you made changes and clicked on
save,
the following pop-up screen will be displayed. Click on
OK
. This will
save your
Private LAN Configuration
settings. If you click
Cancel
, your new settings will not take affect.
Private LAN DHCP Server Enable
Default = CHECKED
If this box is CHECKED, it enables DHCP addresses to be served from the
Private LAN pool.
Private LAN Enable
Default = CHECKED
If this box is CHECKED, it enables the addresses from the Private LAN to
use the NAT interface.
Modem IP Address
Displays the Router’s IP address
Subnet Mask
Displays the Subnet Mask, which determines which portion of an IP
address is controlled by the network, and which portion is controlled by the
host.
DHCP Start Address
Displays the first IP address that the DHCP server will provide.
DHCP End Address
Displays the last IP address that the DHCP server will provide.
DHCP Lease Time
Displays the amount of time the provided addresses will be valid, after
which the DHCP client will usually re-submit a request.
NOTE: DHCP Lease Time is displayed in the following format: (dd:hh:mm:ss)* (This value must be greater than 10
seconds.) The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and
hours must be between 0 and 23.
*(dd = days, hh = hours, mm = minutes, ss = seconds).
