030-300198 Rev. D
53
March 2003
WireSpeed Dual Connect NAT Router
User Guide
If the settings you have entered in the
Private LAN Configuration
screen are incorrect, the following warnings
messages may be displayed via pop-up screens. If this occurs, check the settings in the
Private LAN Configuration
screen.
Warning Message
Check Private LAN DHCP Settings
Start Address is not part of the Subnet
Check the value in the DHCP Start Address field
End Address is not part of the Subnet
Check the value in the DHCP End Address field
End Address is below the Start Address
Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds
Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 53
Check the
Seconds
value in the DHCP Lease Time field
Minutes must be between 0 and 59
Check the
Minutes
value in the DHCP Lease Time field
Hours must be between 0 and 23
Check the
Hours
value in the DHCP Lease Time field
Public LAN Configuration
The following screen will be displayed if you select
Public LAN Configuration
from the
Configuration
menu.
NOTE: The Public LAN feature, if available from your service provider, allows the Router to use LAN IP addresses
that are accessible from the WAN. Public LAN allows your computer to have global address ability. To utilize the
Public LAN feature on your Router, your ISP must support Public LAN and Static IP. Contact your ISP for details.
Public LAN DHCP Server Enable
Default = NOT CHECKED
If this box is CHECKED, it enables DHCP addresses to be served
from the Public LAN pool.
Public LAN Enable
Default = NOT CHECKED
If this box is CHECKED, it enables the addresses from the Public
LAN to bypass the NAT interface.
Public LAN IP Address
Provides a Public IP Address if the service provider does not
automatically provide one.
Public LAN Subnet Mask
Provides a Public Subnet Mask if the service provider does not
automatically provide one.
