030-300198 Rev. D
73
March 2003
WireSpeed Dual Connect NAT Router
User Guide
Service Name
The NAT service you selected.
Local IP Address
If a static IP address has been assigned, it will be displayed here.
Global Port Range
The Global Port Range will be mapped to host the device beginning at the base host
port. The port range that is provided by the service that you are customizing.
Acceptable values for Global Port Range are 1 to 65535, and the first port must be
less than or equal to the second port.
Base Host Port
The port on the WAN that will host the NAT service selected. Acceptable values for
Base Host Port are 0 to 65535, and the first port must be less than or equal to the
second port.
Protocol
The type of Protocol that is used to run this NAT service.
TCP- Transmission Control Protocol.
UDP-User Datagram Protocol (UDP).
Port Forwarding Trigger Ports
To select
Port Forwarding
Trigger Ports
, click on
define custom service
from the
Service Configuration
screen
and then select
Trigger Ports
from the
Custom Service
screen. Click on
next
. The follow settings will be displayed
in the
Trigger Ports
screen. Enter your values in the
Local ‘Trigger’ Port Range
fields and click on
next
to
continue.
Service Name
The NAT service you selected.
Local Trigger Port Range
The local LAN side TCP/UDP port. Acceptable values for Local Trigger Port Range
are 1 to 65535, and the first port must be less than or equal to the second port.
Global Port Range
The WAN side TCP/UDP port range. Acceptable values for Global Port Range are
1 to 65535, and the first port must be less than or equal to the second port.
