030-300198 Rev. D
56
March 2003
WireSpeed Dual Connect NAT Router
User Guide
If you clicked on
OK
in the preceding screen,
the following screen will be displayed. This screen shows that the
Router is being reset.
Single Static IP Configuration
The following settings will be displayed if you select
Single Static IP Configuration
from the
Configuration
menu. See the screens in the following sections.
STOP:
Static NAT must be disabled before you can enable
Single Static IP
. To disable Static NAT, select
Service
Configuration
from the
Configuration
menu. Next, click on the
static NAT
button. Select the device from the
Static NAT Device
pull-down menu and click on
disable
. Return to Single Static IP Configuration by selecting
Single Static IP Configuration
from the
Configuration
menu.
Enabling Single Static IP
To enable Single Static IP, select the device that will share your Single Static IP address from the screen below.
Click on
enable.
NOTE: The Single Static IP Configuration screen allows you to select a device on your LAN that will share your
Single Static IP address.
