Westar Udder Gun Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 52

Westar Udder Gun Скачать руководство пользователя страница 5

5

Do not ingest, inhale, or get chemical in your eyes or on your skin. If this
happens, clean or wash off immediately, and follow your safety warnings on your
chemical’s MSDS sheets. Westar is not liable for damages or injuries caused by
third party chemicals.

Wear appropriate clothing for the working environment to prevent loose articles of
clothing from getting entangled in the gun or damaged.

Do not have, carry, or wear any loose items which can become entangled or
broken: i.e. watches, necklaces, bracelets, rings, cellphone, wallet, keys, long
hair, baggy sleeves etc.

The Udder Gun is for cleaning a cow’s teat only. Do not stick foreign objects into
Udder Gun, such as fingers, hands, hair, or other items.

Operators should be aware that cows may kick while using the Udder Gun,
damage to the gun or personal injury may occur if not used properly.

The Udder Gun System should be inspected for proper working condition before
and during use.

Properly install and maintain system hosing at all times to minimize tripping or
entanglement hazards.

Properly train operators to obtain your desired level of cleaning, sanitizing, and
stimulation.

Do not set guns down where cows or people walk. If operators are not using the
gun, it should be placed in the flush holsters.

Do not use the Udder Gun to prod cows or their legs.

Safety

«
...
3
4
5
6
7
...
»

Содержание Udder Gun





















































Отзывы:

Нет отзывов