Westar Udder Gun, Руководство пользователя, Страница: 25 / 52

25
Daily Maintenance

Check tracking clips for wear and replace if needed.

Make sure drive belts still have tension and traction on the
pulleys.

Take off drive belts and look over all five pulleys for
excessive amounts of wear that could reduce traction.
NOTE : A worn pulley will have the bottom of the groove look shiny and allow the drive belt to
bottom out in the groove.

Re-assemble the gun and test that the trigger functions correctly and that the air motor
sounds up to speed.

Check that the spray nozzle is spraying water/chem, the deflector is not clogged and the
spray is fanned out properly.
Flush Station

Check that the flush station brackets are all tightened and in the correct position.

Insert a gun fully into the flush station to activate the valve and see that water sprays out.

Make sure all three spray nozzles are spraying correctly and un-restricted.

See that the flush stations turn off after being activated for 5-20 seconds.
Good Drive Pulley Worn Drive Pulley
Rotating Modules