Westar Udder Gun, Руководство пользователя, Страница: 22 / 52

22
Operation
2 Stage Trigger
The Udder Gun utilizes a 2 stage trigger. This allows you to clean and stimulate with pre-dip
solution spray, then by backing off the trigger the belts continue to run without spray.
Cleaning stage:
trigger all the way back
(normal operation)

A fully depressed trigger runs the teat belts and
sprays the pre-dip solution into the teat belts and
onto the teat. This is your cleaning stage.
Drying Stage:
if you want to use.

The trigger at half position runs just the teat belts
without pre-dip solution spray. This is where you
would wick off excess solution allowing the teats to
air dry faster.
Do not keep the Udder Gun running on
a teat longer than 2 seconds using the
drying stage.
NOTE : If you are intending to use the Udder Gun to dry, workers should practice trigger control
to prevent errors being made, do not run the gun onto the teats dry.
Trigger at half
Teat Belts running only (no spray)
Trigger back full
Teat Belts and pre-dip solution spray