Westar Udder Gun, Руководство пользователя, Страница: 38 / 52

38
Trouble Shooting
No or low water/chemical spray at gun.
No chemical mixing with water.
Too much or too little chemical mixing with water.
Spray at gun does not stop after releasing trigger. Refer to: No water flowchart, page 39.
Refer to: No chemical flow chart, page 40.

Clogged chemical pickup hose.

Incorrect chemical metering orifice.

Gun valve pins sticking in valve.

Debris on valve seat O-ring.

Valve seat O-ring damaged.

Refer to gun valve servicing, page 34.
Gun not cleaning teats as well.
Teat belts not moving or with little power.
Teat belts not stopping after releasing trigger. 
Worn teat belts, flip over or replace.

Teat belts not moving or with little power.

No water/chemical spray.
Refer to: Teat belts not moving flowchart, page 41.

Gun valve pins sticking in valve.

Debris on valve seat O-ring.

Valve seat O-ring damaged.

Refer to gun valve servicing.
Flush station does not spray water.
Flush station spray time to short or too long.
Flush station spray does not turn off. 
Push gun all the way into the holster.

Check for water pressure.

Brass inlet filter clogged.

Delay knob on shock set too loose.

Shock not turned into slide block enough.

Damaged shock or valve.

Adjust time delay knob on shock by loosening
lock screw and turning knob a small amount.
Check spray time and readjust if needed.

Delay knob on shock set too tight.

Shock turned into slide block too far.

Valve damaged.