5
M10 x 112mm Carriage Bolt (34)–4
M10 x 88mm Button Screw (63)–2
M10 x 52mm Bolt Set (27)–2
M10 Split
Washer (70)–2
M8 Large
Washer (53)–10
Wave Washer
(95)–2
M8 Split
Washer (100)–4
M8 x 65mm Button Screw (99)–4
M8 x 50mm Button
Screw (89)–4
M10 Locknut
(29)–4
M8 Locknut
(46)–12
M4 x 16mm
Screw (66)–4
M4 x 22mm
Screw (91)–2
M8 x 25mm Patch
Screw (22)–2
M8 x 45mm Button
Bolt (50)–4
M8 x 38mm Button
Bolt (112)–4
ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware
kit, check to see if it has been preassembled.
