8
5. The Console (5) can use four D batteries (not
included); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. Otherwise, you may damage the
console displays or other electronic compo-
nents.
Remove the battery cover, insert the bat-
teries into the battery compartment, and reat-
tach the battery cover.
Make sure to orient the
batteries as shown by the diagram inside the
battery compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter.
Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
5
5
Batteries
Battery
Cover
6. While another person holds the Console (5)
near the Upright (2), connect the console wire
to the Upper Wire Harness (86). Then, connect
the console pulse wires to the Pulse Wires
(113). Insert the excess wire downward into the
Upright.
Tip: Avoid pinching the wires.
Attach the
Console (5) to the Upright (2) with four M4 x
16mm Screws (66).
5
86
113
66
2
Console
Wire
Pulse
Wires
6
